Converter Case: Installation

WARNING: This page is about a different variant/trim than selected.

Install the front reduction drive gear and front reduction driven gear. < Ref. to INSTALLATION , Front Reduction Drive Gear. >
Install the converter case cover. < Ref. to INSTALLATION , Converter Case Cover. >
Install the front differential assembly. < Ref. to INSTALLATION , Front Differential Assembly. >
Install the drive pinion shaft assembly. < Ref. to INSTALLATION , Drive Pinion Shaft Assembly. >
Install the primary pulley, secondary pulley and steel chain. < Ref. to INSTALLATION , Primary Pulley and Secondary Pulley. >
Install the transmission case. < Ref. to REMOVAL , Transmission Case. >
Install the forward clutch assembly. < Ref. to INSTALLATION , Forward Clutch Assembly. >
Install the intermediate case. < Ref. to INSTALLATION , Intermediate Case. >
Install the transfer reduction driven gear. < Ref. to INSTALLATION , Transfer Reduction Driven Gear. >
Install the center differential carrier. < Ref. to INSTALLATION , Center Differential Carrier. >
Install the transfer clutch assembly. < Ref. to INSTALLATION , Transfer Clutch. >
Install the rear drive shaft. < Ref. to INSTALLATION , Rear Drive Shaft. >
Install the extension case. < Ref. to INSTALLATION , Extension Case. >
Install the primary speed sensor. < Ref. to INSTALLATION , Primary Speed Sensor. >
Install the secondary pressure sensor. < Ref. to INSTALLATION , Secondary Pressure Sensor. >
Install the transmission harness. < Ref. to INSTALLATION , Transmission Harness. >
Install the control valve body and oil pan. < Ref. to INSTALLATION , Control Valve Body. >
Install the air breather hose. < Ref. to INSTALLATION , Air Breather Hose. >
Install the transmission assembly to the vehicle. < Ref. to INSTALLATION , Automatic Transmission Assembly. >