AWD Control Unit Input/Output Signal Reference Values AWD Control Unit Inspection Table: Function

CONSULT-II can display each diagnostic item using the diagnostic test modes shown following.

DIAGNOSTIC TEST MODES

Diagnostic test mode	Function	Action
SELF-DIAG RESULT MODE	Self-diagnostic results can be read and erased quickly.	Operation Procedure
DATA MONITOR	Input/Output data in the AWD control unit can be read.	Operation Procedure
CAN diagnostic support monitor	The results of transmit/receive diagnosis of CAN communication can be read.	-
ACTIVE TEST	Diagnostic Test Mode in which CONSULT-II drives some actuators apart from the AWD control unit and also shifts some parameters in a specified range.	Description
AWD CONTROL UNIT PART NUMBER	AWD control unit part number can be read.	ACTIVE TEST MODE