Related To Around View Monitor

WARNING: This page is about a different car, the 2011 Infiniti QX56. However, it is still accessible from the selected car via links, so may be relevant.

PROBLEM SYMPTOMS

Symptoms	Check items		Probable malfunction location / Action to take
It does not switch to camera image even when the "CAMERA" switch is pressed or the selector lever is in the reverse position.	"Camera Cont." of "Confirmation/Adjustment" can be selected.		Ignition signal circuit malfunction (around view monitor control unit).
	"Camera Cont." of "Confirmation/Adjustment" cannot be selected.		Around view monitor control unit power supply and ground circuits malfunction. Refer to "AROUND VIEW MONITOR CONTROL UNIT : DIAGNOSIS PROCEDURE ". AV communication circuits malfunction. Refer to "CONSULT-III FUNCTION ".
The screen switches when pressing the "CAMERA" switch or shifting the selector lever to the reverse position, however, all views are not displayed.	Only superimposing is displayed. (Only the image displayed by AV control unit is displayed)		Camera image signal circuit between around view monitor control unit and front display unit malfunction. Refer to "DIAGNOSIS PROCEDURE ".
	Superimposing is not displayed.		Communication circuit between AV control unit and front display unit malfunction. Refer to "CONSULT-III FUNCTION ".
Camera image is rolling.	-
It cannot be switched to rear view monitor even when the selector lever is in the reverse position.	The front view is displayed normally.		Reverse signal circuit malfunction. (AV control unit)
The predicted course line display in front view and rear view is malfunctioning.	The "Steer. Angle Sensor" is not turned ON at "Connection Confirmation" of "Camera Cont."		Steering angle sensor signal circuits.
The front view screen is not displayed. The front of Birds-Eye view screen is not displayed.	Check the item Front Camera in "Connection Confirmation" mode of "Camera Cont."	Image Output Signal: NG COMM Status: NG COMM Line: NG	Front camera image signal circuit malfunction. Front camera power supply and ground circuits malfunction. Refer to "DIAGNOSIS PROCEDURE ".
		Image Output Signal: OK COMM Status: NG COMM Line: NG	Front camera communication signal circuit malfunction. Refer to "DIAGNOSIS PROCEDURE ".
The rear view screen is not displayed. The rear of Birds-Eye view screen is not displayed.	Check the item Rear Camera in "Connection Confirmation" mode of "Camera Cont."	Image Output Signal: NG COMM Status: NG COMM Line: NG	Rear camera image signal circuit malfunction. Rear camera power supply and ground circuits malfunction. Refer to "DIAGNOSIS PROCEDURE ".
		Image Output Signal: OK COMM Status: NG COMM Line: NG	Rear camera communication signal circuits malfunction. Refer to "DIAGNOSIS PROCEDURE ".
The front-side screen is not displayed. The passenger side of Birds-Eye view screen is not displayed.	Check the item Pass-Side Camera in "Connection Confirmation" mode of "Camera Cont."	Image Output Signal: NG COMM Status: NG COMM Line: NG	Side camera RH image signal circuit malfunction. Side camera RH power supply and ground circuits malfunction. Refer to "DIAGNOSIS PROCEDURE ".
		Image Output Signal: OK COMM Status: NG COMM Line: NG	Side camera RH communication circuit malfunction. Refer to "DIAGNOSIS PROCEDURE ".
The driver side of Birds-eye view screen is not displayed.	Check the item Dr-Side Camera at "Connection Confirmation" mode of "Camera Cont."	Image Output Signal: NG COMM Status: NG COMM Line: NG	Side camera LH image signal circuit malfunction. Side camera LH power supply and ground circuits malfunction. Refer to "DIAGNOSIS PROCEDURE ".
The driver side of Birds-eye view screen is not displayed.		Image Output Signal: OK COMM Status: NG COMM Line: NG	Side camera LH communication circuit malfunction. Refer to "DIAGNOSIS PROCEDURE ".
When shift position is other than "R" the front-side and front screen or the Birds-Eye view and front screen remain displaying even if the vehicle speed increases.	-		Vehicle speed signal circuit malfunction (around view monitor control unit).