Symptom Chart

WARNING: This page is about a different car, the 2003 Nissan Murano. However, it is still accessible from the selected car via links, so may be relevant.

SYMPTOM CHART

Symptom	Diagnoses / service procedure		Refer to
Only setting change function cannot be set with display.	1. Preliminary check		PRELIMINARY CHECK
	2. CAN communication inspection using CONSULT-II (self-diagnosis)		CAN COMMUNICATION INSPECTION USING CONSULT-II (SELF-DIAGNOSIS)
	3. If the above system are normal, check display system	Integrated display system (with out NAVI)	INTEGRATED DISPLAY SYSTEM
	3. If the above system are normal, check display system	Navigation system (with NAVI)	NAVIGATION SYSTEM
A part of seat system does not operate (both automatically and manually).	1. Sliding motor circuit inspection		SLIDING MOTOR CIRCUIT INSPECTION
	2. Reclining motor circuit inspection		RECLINING MOTOR CIRCUIT INSPECTION
	3. Front lifting motor circuit inspection		FRONT LIFTING MOTOR CIRCUIT INSPECTION
	4. Rear lifting motor circuit inspection		REAR LIFTING MOTOR CIRCUIT INSPECTION
	5. If the above systems are normal, replace the driver seat control unit		COMPONENT PARTS AND HARNESS CONNECTOR LOCATION
A part of pedal adjust and door mirror does not operate (both automatically and manually).	1. Pedal adjusting motor circuit inspection		PEDAL ADJUSTING MOTOR CIRCUIT INSPECTION
	2. Mirror motor LH circuit check		MIRROR MOTOR LH CIRCUIT CHECK
	3. Mirror motor RH circuit check		MIRROR MOTOR RH CIRCUIT CHECK
	4. If the above systems are normal, replace the automatic drive positioner control unit.		COMPONENT PARTS AND HARNESS CONNECTOR LOCATION
A part of seat system does not operate (only automatic operation).	1. Sliding sensor circuit inspection		SLIDING SENSOR CIRCUIT INSPECTION
	2. Reclining sensor circuit inspection		RECLINING SENSOR CIRCUIT INSPECTION
	3. Front lifting sensor circuit inspection		FRONT LIFTING SENSOR CIRCUIT INSPECTION
	4. Rear lifting sensor circuit inspection		REAR LIFTING SENSOR CIRCUIT INSPECTION
	5. If the above systems are normal, replace the driver seat control unit		COMPONENT PARTS AND HARNESS CONNECTOR LOCATION
A part of door mirror system does not operate (only automatic operation).	1. Mirror sensor LH circuit check		MIRROR SENSOR LH CIRCUIT CHECK
	2. Mirror sensor RH circuit check		MIRROR SENSOR RH CIRCUIT CHECK
	3. If the above systems are normal, replace the automatic drive positioner control unit.		COMPONENT PARTS AND HARNESS CONNECTOR LOCATION
All the automatic operations do not operate.	1. Key switch and key lock solenoid circuit inspection		KEY SWITCH AND KEY LOCK SOLENOID CIRCUIT INSPECTION
	2. Detention switch circuit inspection		DETENTION SWITCH CIRCUIT INSPECTION
	3. UART communication line circuit inspection		UART COMMUNICATION LINE CIRCUIT INSPECTION
	4. Pedal adjusting sensor circuit inspection		PEDAL ADJUSTING SENSOR CIRCUIT INSPECTION
	5. If all the above systems are normal, replace the automatic drive positioner control unit.		COMPONENT PARTS AND HARNESS CONNECTOR LOCATION
A part of seat system does not operate (only manual operation).	1. Sliding switch circuit inspection		SLIDING SWITCH CIRCUIT INSPECTION
	2. Reclining switch circuit inspection		RECLINING SWITCH INSPECTION
	3. Front lifting switch circuit inspection		FRONT LIFTING SWITCH CIRCUIT INSPECTION
	4. Rear lifting switch circuit inspection		REAR LIFTING SWITCH CIRCUIT INSPECTION
	5. If the above systems are normal, replace the driver seat control unit		COMPONENT PARTS AND HARNESS CONNECTOR LOCATION
A part of pedal adjust and door mirror does not operate (only manual operation).	1. pedal adjusting switch circuit inspection		PEDAL ADJUSTING SWITCH CIRCUIT INSPECTION
	2. Door mirror remote control switch (change over switch) circuit inspection		DOOR MIRROR REMOTE CONTROL SWITCH (CHANGEOVER SWITCH) CIRCUIT CHECK
	3. Door mirror remote control switch (mirror switch) switching circuit inspection		DOOR MIRROR REMOTE CONTROL SWITCH (MIRROR SWITCH) CIRCUIT CHECK
	4. If the above systems are normal, replace the automatic drive positioner control unit		COMPONENT PARTS AND HARNESS CONNECTOR LOCATION
Only memory switch operation.	1. Seat memory switch circuit inspection		SEAT MEMORY SWITCH CIRCUIT INSPECTION
Only memory switch operation.	2. If the above systems are normal, replace the driver seat control unit		COMPONENT PARTS AND HARNESS CONNECTOR LOCATION
Seat memory indicator lamps 1 and 2 do not illuminate.	1. Seat memory indicator lamp circuit inspection		SEAT MEMORY INDICATOR LAMP CIRCUIT INSPECTION
Seat memory indicator lamps 1 and 2 do not illuminate.	2. If all the above systems are normal, replace the driver seat control unit.		COMPONENT PARTS AND HARNESS CONNECTOR LOCATION
The Entry/Exiting does not operated when door is opened and closed. (The Entry/Exiting operates with key switch)	1. Driver door switch circuit inspection		FRONT DOOR SWITCH (DRIVER SIDE) CIRCUIT INSPECTION
	2. If all the above systems are normal, replace the BCM.		REMOVAL AND INSTALLATION OF BCM
Only door mirror system does not operate (only manual operation).	1. Door mirror remote control switch ground circuit inspection		DOOR MIRROR REMOTE CONTROL SWITCH GROUND CIRCUIT INSPECTION
Only door mirror system does not operated (only automatic operation).	1. Door mirror sensor power supply and ground circuit inspection		DOOR MIRROR SENSOR POWER SUPPLY AND GROUND CIRCUIT INSPECTION
Only seat system does not operate (only manual operation).	1. Power seat switch ground circuit inspection		POWER SEAT SWITCH GROUND INSPECTION