Section 17 ((Electronic Shift Module (ESM) - Electrical Diagnostics - 8HP95 Automatic Transmission))

• Diagnostic Code Index
• DTC Troubleshooting
  • B2204-00-Ecu Configuration Mismatch
    • Notes
    • When Monitored
    • Set Condition
    • Default Action
    • Possible Causes
    • Diagnostic Test - B2204-00
  • B223B-00-Vehicle Configuration Mismatch
    • Notes
    • Theory Of Operation
    • When Monitored
    • Set Condition
    • Default Action
    • Possible Causes
    • Diagnostic Test
  • P0607-00-Ecu Internal Performance - ESM
    • Notes
    • Theory Of Operation
    • When Monitored
    • Set Condition
    • Default Action
    • Possible Causes
    • Diagnostic Test-P0607-00
  • P0814-00-Transmission Range Display Circuit
    • Notes
    • Theory Of Operation
    • When Monitored
    • Set Condition
    • Possible Causes
    • Diagnostic Test - P0814-00
  • P0820-00-Gear Lever X-Y Position Sensor Circuit
    • Notes
    • Theory Of Operation
    • When Monitored
    • Set Condition
    • Possible Causes
    • Diagnostic Test P0820-00
  • P0930-00-BTSI Control Circuit Low
    • Notes
    • Theory Of Operation
    • When Monitored
    • Set Condition
    • Default Action
    • Possible Causes
    • Diagnostic Test-P0930-00-ESM
  • P0931-00-BTSI Control Circuit High
    • Notes
    • Theory Of Operation
    • When Monitored
    • Set Condition
    • Default Action
    • Possible Causes
    • Diagnostic Test - P0931-00-ESM
  • P1C86-14-PRNDL Display-Circuit Short To Ground Or Open
    • Notes
    • Theory Of Operation
    • When Monitored
    • Set Condition
    • Default Action
    • Possible Causes
    • Diagnostic Test - P1C86-14
  • P1C8B-16-Battery Voltage - Circuit Voltage Below Threshold
    • Notes
    • Theory Of Operation
    • When Monitored
    • Set Condition
    • Possible Causes
    • Diagnostic Test - P1C8B-16-ESM
  • P1C8B-17-Battery Voltage - Circuit Voltage Above Threshold
    • Notes
    • Theory Of Operation
    • When Monitored
    • Set Condition
    • Possible Causes
    • Diagnostic Test - P1C8B-17
  • P1C8C-16-System Voltage-Circuit Voltage Below Threshold
    • Notes
    • Theory Of Operation
    • When Monitored
    • Set Condition
    • Possible Causes
    • Diagnostic Test - P1C8C-16-ESM
  • P1C8C-17-System Voltage-Circuit Voltage Above Threshold
    • Notes
    • Theory Of Operation
    • When Monitored
    • Set Condition
    • Possible Causes
    • Diagnostic Test - P1C8C-17-ESM-845RE_8HP45
  • U0001-00-Can C Bus
  • U0002-00-Can C Bus Off Performance
  • U0074-00-Dedicated Powertrain (D-Pt) Can Bus Off
    • Notes
    • Theory Of Operation
    • When Monitored
    • Set Condition
    • Possible Causes
    • Diagnostic-Test-U0074-00
  • U0101-00-Lost Communication With TCM
  • U0140-00-Lost Communication With Body Control Module
  • U0402-00-Invalid Data Received From TCM
  • U0422-00-Implausible Data Received From Body Control Module
  • U114C-00-Lost Communication With PRNDL Display
    • Theory Of Operation
    • When Monitored
    • Set Condition
    • Default Action
    • Possible Causes
    • Diagnostic Test
  • U11C3-00-ESM Lost Communication With TCM On D-Pt Can
    • Notes
    • Theory Of Operation
    • When Monitored
    • Set Condition
    • Default Action
    • Possible Causes
    • Diagnostic Test-U11C3-00
  • U145D-00-Implausible Data Received From TCM On D-Pt
    • Notes
    • Theory Of Operation
    • When Monitored
    • Set Condition
    • Possible Causes
    • Diagnostic-Test
• Standard Procedure
  • Pre-Diagnostic Troubleshooting Procedure
  • Electronic Shift Module (ESM) Verification Test
    • Notes
    • ESM Verification Test