DTC U1418, Pre-Diagnostic Troubleshooting Procedure, Intermittent Condition Check, System Checks, Symptom Tests, Pcm/ECM Programming, Powertrain Verification Test
- U1418-Implausible Right Wheel Distance Signal Received
- Pre-Diagnostic Troubleshooting Procedure
- Intermittent Condition
- *Checking The Exhaust System For Leaks
- *Checking The Fuel Delivery System
- *Checking The Oxygen Sensor Operation
- *Engine Cranks But Does Not Start
- *Etc Intermittent No Crank Condition
- *Fuel Pressure Leak Down
- *Hard Start (Fuel System)
- *No Crank Condition
- *No Response With A No Start Condition
- *Start And Stall Condition
- Standard Procedure
- Pcm/ECM Programming - Gas
- Pcm/TCM Flash Reprogramming
- Table Of Contents
- Section 1 - Pcm / TCM Flash Procedure
- REPAIR PROCEDURE - Using StarSCAN® or StarMOBILE® Desktop Client
- REPAIR PROCEDURE - Using StarMOBILE® Standalone Diagnostic Mode
- Section 2 - Additional Pcm / TCM Replacement Procedures
- Step-By-Step Instructions
- Section 3 - Authorized Modification Label
- Required Tools/Equipment:
- TECH TIPS and INFORMATION:
- Parts Required
- Powertrain Verification Test
- Pcm/ECM Programming - Gas